当前位置:首页 >> 金相制样设备(切割,磨抛,镶嵌) >> 镶样机 >>美国Buehler通用热压镶嵌机SimpliMet 3000
通用热压镶嵌机

通用热压镶嵌机

通用热压镶嵌机,进口热压镶嵌机,进口镶嵌机

  • 型号:SimpliMet 3000
  • 品牌:Buehler
  • 产地:美国
遵循标准:
简介:
该款通用热压镶嵌机适用于具有多种镶嵌样需求的实验室用户。采用预编程记录各种镶嵌方法,可对不同尺寸的镶嵌样进行重复制作。

{content.title}产品介绍

该款通用热压镶嵌机适用于具有多种镶嵌样需求的实验室用户。采用预编程记录各种镶嵌方法,可对不同尺寸的镶嵌样进行重复制作。


产品优点:

可编程性降低复杂性

适用于有多种镶嵌样需求且镶嵌尺寸不同的实验室。

存储和撤销5种不同的程序,降低复杂性和消除错误,提供灵活性来满足多变的实验室要求

通过选择不同尺寸的模具来优化各种各样的试样大小。节约镶嵌介质并提升镶嵌质量

Specifications


Operation

Automatic electro-hydraulic

Power Source

85-264VAC, 50/60Hz, 1 phase

Molding Pressure

1200 - 4400psi [80 - 300bar] in 100psi   [5bar] increments

Molding Temperature

120 - 360°F [50 - 80°C] in 20°F [10°C]   increments

Heating Power

1500Watt @ 115/230VAC

Heating Time

0 - 20 minutes in 10 second increments

Cooling Time

0 - 30 minutes in 10 second increments

Mold Type

Cylindrical, including upper and lower   rams and duplex mold spacer

Closure Type

Insluated bayonet with piston indent

Mold Diameters

1in, 1.25in, 1.5in, 2in, 25mm, 30mm,   40mm, 50mm

Touch-pad Controls

On/Off; Heat Time; Cool Time; Molding   Temperature; Molding Pressure; Mold Size; Ram Up/Down; Maunal Cool; Cycle   Start; Cylinder Open; Unit of Measure; Language and also including   Thermoplastic; Load and Save Methods

Units of Measure

Imperial or Metric

Water Flow Rate

0.5gal/min [2ℓ/min] minimum

Water Pressure

45-75psi [3-5bar]

Control Voltage

24VDC

Method Programmability

4 Buehler, Preprogrammed Methods per mold   size; 25 User Definable Methods

Preload Pressure

0 - 400psi [0 - 30bar] in 50psi [5bar]   increments

Thermoplastic Function

Automatically sets correct parameters for   thermoplastic resins such as TransOptic™ and cools the mount in a controlled,   linear fashion

Compliance

In accordance with EC Directives

 


联系我们: Tel: 400-0022-082, E-mail: info@hugetall.com